How do I find out what my default router is?
Table of Contents
How do I find out what my default router is?
In the Command Prompt window, type “ipconfig” and press “Enter/Return” on your keyboard. You will see a lot of information generated in this window. If you scroll up you should see “Default Gateway” with the device’s IP address listed to the right of it.
What is default router code?
#1) The default username and password can be obtained from the router manual which comes with the router when you first purchase and install it. #2) Generally, for most of the routers, the default username and password is “admin” and “admin”.
How do I figure out my router address?
How to find the IP address of your router using Windows
- Right-click the Windows icon in the bottom-left of your screen, and select “Command Prompt.”
- In the Command Prompt window, type “IPCONFIG” and press Enter.
- Find the “Default Gateway” section. The number listed here is your router’s IP address.
How do I find my 192.168 0.1 password?
The default IP address is 192.168. 0.1. At the login, enter the username (admin) and your password (default password is nothing). Note: If you have forgotten this password, you will have no choice but to reset the router to factory defaults.
How do I access my PLDT router?
Type 192.168. 1.1 (the most common IP for PLDT routers) in the address bar of your web browser to access the router’s web-based user interface. The default username for your PLDT router is adminpldt. The default password is 1234567890.
Can I see my router password?
Check your router’s default password, usually printed on a sticker on the router. In Windows, head to Network and Sharing Center, click on your Wi-Fi network, and head to Wireless Properties > Security to see your Network Security Key. On a Mac, open Keychain Access and search for your Wi-Fi network name.
What is my wifi password?
If you have Android 10 or anything newer, you can find the wifi password directly on your phone following these steps: Go to “settings” on your phone, then “wifi”. Select “saved networks” and click on your home network. A barcode will appear with the wifi password written below.
What if I forgot router password?
If you can’t access the router’s web-based setup page or forgot the router’s password, you may reset the router to its default factory settings. To do this, press and hold the Reset button for 10 seconds. NOTE: Resetting your router to its default factory settings will also reset your router’s password.
What is the default gateway of PLDT?
Typically, the default gateway of most PLDT modems is 192.168. 1.1, with the exception of some modems like Ultera, which has a default gateway of 192.168. 15.1.
How do you find default router?
Finding your router’s default gateway on Windows. Access your Command Prompt by clicking on Start and then searching for “cmd“. After opening the Command Prompt, type ipconfig and hit the Enter key. You will see your default gateway listed next to Default Gateway.
How do you connect a router to your computer?
Select the SSID (router name) of the wireless network you wish to connect to, and click “Connect.”. Enter the network password ( WEP or WPA key) into the “network key” field, and click “OK.”. Windows will notify you when the computer establishes a connection with the router.
What is default username and password for router?
In many cases, the default username and password for a router is the following. Username: admin or administrator. Password: , admin, or password. Tip: If you do not know your router’s default router username and password, go to routerpasswords.com for a comprehensive listing.
How to access 192.168.1.1?
Connect your router to a computer using an Ethernet cable.