How many pipes can fill the tank in an hour?

3 pipes
3 pipes are required to fill a tank in 1 hour.

How long does it take to fill a water tank?

= (Volume of tank) / (Volume of water flow in 1 sec) = 0.48/0.0025 = 192 sec. Time taken to fill the tank = 0.0025 / 0.48 = 0.005 sec.

Can fill a tank in 12 hours?

Pipe A can fill a tank in 12 hours and pipe B can empty a tank in 18 hours. Both pipes are opened at 6:00 am, after some time pipe B is closed, and the tank is full at 8:00 pm on the same day. let B is opened for t hours, and the total system takes 14 hours to fill the tank.

How long does it take for large pipe to fill the tank alone?

So the large pipe will take 2 hours to fill the tank alone.

How long does it take for smaller pipe to fill the tank alone?

1 Expert Answer Assuming that whole work is 1. If small pipe works alone, it spent X hr, while for the big pipe, working alone, it takes x-12. Small pipe makes 1/X per hour, the big makes hourly 1 / x-12. But they both make 1 /8 per hour working together.

Can fill a tank with water in 2 hours?

A pump can fill a tank with water in 2 hours. Again, With the leakage, the pipe takes 2 i.e. 7/3 hours to fill the tank. The time taken by the leak to empty the tank = 1/(1/14) = 14. ∴ The time taken by the leak to empty the tank is 14 hours.

Why is water tank empty?

The water tank could be empty simply because the well ran out of water (water was pulled out of the well faster than it could recover), or perhaps because the water pump never came on to replenish the water supply.

How do you calculate tank capacity in pipes and cisterns?

Let the capacity of the tank = LCM of (12,15, 6) = 60 litres. If all the pipes are opened simultaneously, (5+4-10) litres will be filled in a minute.

How long does it take to fill a 2 pipe tank?

Two pipes, A and B, are used to fill a water tank. The empty tank is filled in 10 hours if the two pipes are used together. If pipe A alon e is used for 6 hours and then turned off, pipe B will take over and finish filling the tank in 18 hours. How long will it take each pipe alone to fill the tank?

What two pipes are used to fill a water tank?

Two pipes, A and B, are used to fill… Two pipes, A and B, are used to fill a water tank. The empty tank is filled in 10 hours if the two pipes are used together. If pipe A alon e is used for 6 hours and then turned off, pipe B will take over and finish filling the tank in 18 hours.

How long does it take for a water tank to empty?

SOLUTION: An inlet pipe can fill a water tank in 10 hours, while an outlet pipe can empty the same tank in 15 hours. By mistake, both pipes are left open.

How many TAPS does it take to fill a tank?

Three taps P,Q and R can fill a tank in 10,20 and 30hours respectively. If P is open all the time and Q and R are open for one hour each alternately, then the tank will be full in : Now, it is the turn of P and Q and 3/20 part is filled by P and Q in 1 hour.