Was the M48 tank used in ww2?
Table of Contents
Was the M48 tank used in ww2?
It was designed as a replacement for the M26 Pershing, M4 Sherman variants and M46 Pattons used in the Korean War, and as the successor to the M47 Patton. Nearly 12,000 M48s were built, mainly by Chrysler and American Locomotive Company, from 1952 to 1961….
| M48 Patton | |
|---|---|
| Place of origin | United States |
| Service history |
Was the M60 tank any good?
Yes, it was good for its time, comparable to the Soviet T-55 and T-62 tanks. Subsequent variants of the M60, also referred to by the tankers that used it as the “M60 A-nothing” or “Slick 60”.
What was the main battle tank in Vietnam?
M48
[4] The M48 served as the U.S. Army and Marine Corps’s primary battle tank in South Vietnam during the Vietnam War. It was widely used by U.S. Cold War allies, especially other NATO countries. The M48 Patton tank was designed to replace the previous M47 Pattons and M4 Shermans.
What is Patton tank?
Patton tank may refer to any of a series of tanks used by the United States military from the 1950s to the 1990s, named for General George S. Patton. M48 Patton, a tank model in service from the mid-1950s through the Vietnam War with the U.S. Army, and still operational in foreign service.
Is there a Patton tank?
M60 Patton, the standard main battle tank of the United States from 1960 until it was replaced by the M1 Abrams in 1980, still extensively used worldwide. Not officially a member of the Patton tank family.
When was the M48 retired?
The M67, a flame thrower-equipped M48 variant, proved to be a potent tool of jungle warfare. Between all of its variants, as many as 12,000 M48’s were produced. The M48 was gradually replaced from the 1960s onwards by its even more capable successor, the M60; the last M48 models were retired in the late 1980s.
Did the M60 have a stabilizer?
The add-on-stabilization system provides stabilization control for both gun elevation and turret traverse.
Is the M60 a Patton tank?
Although developed from the M48 Patton, the M60 tank series was never officially christened as a Patton tank. The US Army considered it a “product-improved descendant” of the Patton tank’s design. The M60 tank series became America’s primary main battle tank during the Cold War. Over 15,000 M60s were built by Chrysler.
How does the M60 tank compare to the M48?
Overall the M60 tanks had somewhat better armor than the M48s. At times these tanks had quite comparable characteristics, capabilities, etc. For example, the M48A5 tank was an upgrade of the M48 to make it comparable to an M60A1.
Which M48 turret is most similar to the M60?
However, the modernized M48A5 model (which is basically the M60-version of the M48) also incorporates the 105 mm M68, so your most reliable bet is the upper glacis. The original M60 using the T95E5 turret bore a very strong resemblance to the M48’s turret.
What is the difference between the M48 and M48A5?
As most models of the M48 use the 90 mm, the difference should be easily noted. However, the modernized M48A5 model (which is basically the M60-version of the M48) also incorporates the 105 mm M68, so your most reliable bet is the upper glacis.
What is the difference between the M48 Patton and M60 Patton?
Pointless note but the M60 Patton was the last American tank to solely use homogenous steel armor as protection. M48 Patton next to a bunch of M60 models. Another obvious difference is the 90 mm fitted on the M48 models below M48A5 and the 105 mm fitted on the M60.