What does varnish do to miniatures?

A gloss varnish will give your miniature or scale model a glossy and shiny finish. A matte varnish gives you a less shiny, dull or flat look that is more appropriate for tabletop gaming miniatures and models of military vehicles, models of buildings, etc.

What is the purpose of a varnish?

Varnishes provide protective coatings for wooden surfaces, paintings, and various decorative objects. Varnish protects and enhances the appearance of wooden floors, interior wood paneling and trim, and furniture.

Should I thin varnish miniatures?

Depending on the varnish you use, you could thin it to get an even cover. Always read the instructions as some products are intended to be thinned before use. Varnishing by airbrush: The application is similar to spray varnish. Thinning depends on the product.

Should you seal your miniatures?

Absolutely yes. Without sealing the oils on your hands will spoil the paint job. I use Krylon Matte Finish as well, cheapo stuff but I feel it gives the best finish if you use it sparingly. It give it tiny hint of gloss – a step above traditional minis-painting matte.

Do I need to seal my miniatures?

When you don’t seal your models, and you handle them routinely for games, then the paint will slowly wear thin and rub off over time. Also, with a sealer being the outer layer on a miniature, it also means if it falls then it’s the sealer coat that takes the impact, not the paint.

Can you get spray varnish?

Spraying varnish on your wooden door will produce a smooth, blemish-free finish if you do it right, and the finish will last if you use the right kind of varnish. All these types of varnish are available in spray cans, but you can also use spray equipment.

What are the disadvantages of varnish?

Disadvantages of Varnish The disadvantages of wood varnish include drying too slowly, being difficult to clean up, susceptibility to dust buildup, discoloration over time, incompatibility with water-based products or lacquer, and issues repairing or stripping it, according to Lee’s Wood Projects.

Is it necessary to varnish wood?

Not only does it look great and creates a nice natural feel compared to metal or plastic, but many woods (in particular, hard woods) are actually very durable. However, to make wood practical for everyday use in our homes, it is necessary to apply a finish, such as varnish.

Can you get Matt varnish?

Wilko Matt Quick Dry Ultra Tough Varnish Clear 250ml is ideal for use on bare, stained or previously varnished woodwork. This water-resistant formula dries in 2-4 hours and protects against abrasion, scratches and scuffs.

What is the best way to varnish miniatures?

Varnishing miniatures is important for protecting the paint job and improving photography of the models. If you’re sharing images of your models, present them in the best light possible. Use a matte spray varnish to create an evenly lit surface across the entire miniature.

Do I need to seal my painted miniatures?

That’s a choice you can totally make. However, I would recommend that you always seal your painted miniatures and here’s why. Also, I use the term seal when talking about spraying a protection layer on your miniatures, however, the term varnish is widely used as well.

Do you understand the qualities of your varnish?

What I have come to notice is that many hobbyists do not understand the qualities of the product they are using, or how to get the best use out of them. There are three types of varnish that most people are familiar with, gloss, satin and matt. The names reflect the finish left by the product but do not otherwise offer any information.

What is the best varnish to use on a model?

But, if you go in this route your best method for applying this varnish is to use an airbrush. Thin the varnish with water (approximately 1:1 ratio) and airbrush it onto your model. Advantage of non-aerosol water-based varnishes: A huge side benefit of using a non-aerosol spray varnish, such as the Liquitex varnish is the cost-effectiveness of it.