What are the basic requirements of a braking system?

i) The brakes must be strong enough to stop the vehicle within a minimum distance in an emergency. But this should also be consistent with safety. ii)The brakes must have good antifade characteristics i.e, their effectiveness should not decrease with constant prolonged application e.g. while descending hills.

What are the two design of brakes?

The brakes may be disc type or drum type. The front brakes play a greater part in stopping the car than the rear ones, because braking throws the car weight forward on to the front wheels. Many cars therefore have disc brakes , which are generally more efficient, at the front and drum brakes at the rear.

How does a braking system work?

To stop a car, the brakes have to get rid of that kinetic energy. They do so by using the force of friction to convert that kinetic energy into heat. This hydraulic system multiplies the force of your foot on the brake pedal into enough force to apply the brakes and make the car stop.

What are the functions of brakes What are the requirements of a good braking system?

The function of vehicle brake system is to stop or slow down the moving motor vehicle or prevent it from moving when in stationary position. All the braking systems use the force of friction for their operation. Friction opposes the relative motion of the bodies that are in contact with each other.

How do you install a brake system?

Here’s how to do it:

1. Step 1: Acquire Tools. 3/8″ Ratchet.
2. Step 2: Buy Brake Pads And Rotors.
3. Step 3: Loosen Lugs.
4. Step 4: Raise Car.
5. Step 5: Loosen Caliper.
6. Step 6: Remove Caliper Carrier.
7. Step 7: Remove Rotor.
8. Step 8: Install New Rotor.

What is a brake assembly?

Brake-assembly meaning The collective replacement parts used to repair an automobile’s worn down brakes.

What is mechanical braking system?

Mechanical braking system: It is the type of braking system in which the brake force applied on the brake pedal is carried to the final brake drum or disc rotor by the various mechanical linkages like cylindrical rods, fulcrums, springs etc. In order to stop the vehicle.

What are the parts of brake system?

The major brake system components include the brake pedal, brake booster, brake master cylinder, brake lines and hoses, brake calipers and pistons, disc brake pads or brake shoes, disc brake rotors or brake drums, brake fluid, anti-lock brake system (ABS) control module, wheel speed sensors, and there are many more …

Why is the braking system important?

Your vehicle’s braking system is by far the most important safety feature it has. The ability to stop or slow down at a split second significantly helps stop incidents and accidents. Therefore, keeping them well maintained will make the difference between encountering a huge accident or even a potential tragedy.

What is SAE SUPRA 2017 brake design?

The basic aim of this work is to achieve the required standards for brake design in SAE SUPRA and to scale through the dynamic test at the competition. The designing of the whole braking system complied with all of the templates and envelopes required by the SAE SUPRA 2017 rules.

What is the classification of a brake system?

Classification of Brake System The brake s may be classified based on the following 1. On the Basis of Method of Actuation, brakes are classified as: Fig. 1: Foot Brake (www.google.com) Fig. 2: Hand Brake (www.google.com) 2.

What is the best software for braking system analysis?

Fundamentals of vehicle statics and dynamics and previous research works are kept in the core of designing and sanalysis of various components of braking system. Along with it, different ‘Engineering Software’ like SOLIDWORK and ANSYS are utilized for the analysis of brake disc, considering structural and thermal aspects.

What is FEA on brake pedal?

RESULTS AND ANALYSIS FEA on Brake Pedal (Objectives) To create simulations of the pedal design that focus on the mass of the current design. It involves adding machined pockets on both sides of the pedals and validating the design change in the Stress Analysis Environment.

https://www.youtube.com/watch?v=29FR0ZVnxFU