What are the requirements of SAE suspension system?

Fig.1Suspension System SAE Suspension should have following requirements 5. Ease for the driver at 1) It must have Shock Absorbers. 2) Suspension travel is not less than 25.4mm (1 Inch) for both jounce and rebound. 3) Must have appropriate attenuation vibration ability.

Is there a design and analysis procedure for front double A-arm suspension?

This paper presents the procedure of design and analysis (both kinematic and dynamic) of the front double A-arm push-rod suspension system for a formula student race car. The design of suspension of a race car is complex; hence there is a need to have a procedure by following which the suspension system can be designed.

How is the suspension system designed and analyzed?

The CAD models of the components in the suspension system are made using SolidWorks® and the Finite element analysis of the components is done using ANSYS® Workbench. Both kinematic and dynamic analysis of the designed suspension system is performed.

How does a car’s suspension improve overall safety and performance?

But if you have a suspension system, then the inside wheels will remain in contact with the ground since the springs on the suspension mechanism will push the wheels towards the ground. If you take these two functions together, you can see that a car’s suspension can improve overall vehicle safety and performance.

How to manufacture suspension system and wheel assembly?

Manufacturing is done by Major machining processes like laser cut, grinding, welding, lathe operations, etc. and assemblies were done by bolting and press fitting, etc. 3. General Terms in Suspension System and Wheel Assembly Camber Angle Camber angle is the inclination of the vehicle tire steering.

How to design an FSAE car?

The suspension system is one of the most important systems to consider when designing a FSAE car. All accelerations, either lateral or longitudinal, must be put to the ground through the tires, which are held in contact with the ground by the suspension system. The suspension system must therefore keep the largest contact tire patch at all times.

What is the importance of suspension system in automobile industry?

Abstract In automobile industry it is essential to produce the Compact and reliable Suspension system in order to increase the vehicle performance. Also, lot of forces during cornering, acceleration and bump conditions are also applied directly during dynamic condition.

Will there be a 2020 Formula Bharat & SAE SUPRA?

The first objective of this report was to design, manufacture, and test a Formula SAE racecar chassis for use in the 2020 Formula Bharat & SAE SUPRA. Several factors will be taken into account, including vehicle dynamics, chassis rigidity, component packaging, and overall manufacturing and performance.

What is the minimum suspension travel required for a car?

2) Suspension travel is not less than 25.4mm (1 Inch) for both jounce and rebound. 3) Must have appropriate attenuation vibration ability. 4) Ensure the car has good handling and stability performance. *Correspondin authors ORCID ID: 0000-0002-4226-2725 DOI: https://doi.org/10.14741/ijcet/v.8.3.17

What is the best design style for SUPRA SAEINDIA/FSAE?

The most popular style for SUPRA SAEINDIA/FSAE is the tubular space frame. Space frames are a series of tubes that are joined together to form a structure that connects all of the necessary components.