What is a fixture used to draw water from a pipe?

Pipes. Tapware – an industry term for that sub-category of plumbing fixtures consisting of tap valves, also called water taps (British English) or faucets (American English), and their accessories, such as water spouts and shower heads. Terminal valves for dishwashers, ice makers, humidifiers, etc. Urinals.

What are fittings and fixtures in plumbing?

Plumbing fittings & fixtures are the means for safely using water in the home. These are the valves, faucets, toilets, shower heads, drain stoppers and basins of your plumbing system. Over time, fittings & fixtures can wear out so they are usually made to be replaceable.

What is the name of pipe fittings?

When two ends of pipes are joined, the pipe fitting used is called union. A union is made of three parts namely a nut, a male end and a female end. The male and female ends are assembled with the support of the nuts, and necessary pressure is made to connect the joint.

What is a fixture outlet pipe?

Fixture outlet pipe means a pipe that connects the waste opening of a fixture to the trap serving the fixture.

Is a sink a fixture or fitting?

Plumbing codes require that every house must have at least one toilet, lavatory sink, bathtub or shower, and a kitchen sink. These, and some other items referred to in this chapter, are known as fixtures.

What are valves in plumbing?

A valve is a type of fitting that allows for regulation, control, and direction of fluids passing through a pipe. Valves allow homeowners to isolate sections of plumbing for repairs, or shut off a water line when a leak sprouts. They are also widely used throughout most commercial and industrial applications.

Is a valve a fixture?

A device designed to control and guide the flow of water. Examples include faucets, shower heads, shutoff valves, shower valves, and drinking fountain spouts. Some people call these “fixtures,” but that term means something different to the plumbing industry.

What is a plumbing vent header?

A vent header is the combination of two or more major sources of air to the drainage system; such as a vent stack or a stack vent.

What is a fixture trap?

A device for sealing a passage against the escape of gases, especially a U-shaped or S-shaped bend in a drainpipe that prevents the return flow of sewer gas by means of a water barrier.

Is a sink a plumbing fixture?

Any plumbing component like a faucet that has a specific use and application is a plumbing fixture. Fixtures include components like faucets and sinks, toilets, showerheads, and bathtubs. Other fixtures include showers, and less commonly in the U.S., bidets. The kitchen tap is also a plumbing fixture.

How do you connect a copper pipe to a tap?

The nut is tightened to the tap thread and the copper pipe is fed into the end of the fitting. This is then soldered into place. See our project on soldered pipe joints. This is a compression fitting tap connector. The nut is tightened to the thread on the tap and there is a nut on the other end which contains an Olive.

What is a Yorkshire fitting tap connector?

E – Yorkshire Tap Connector Fitting. This is a Yorkshire fitting tap connector. The nut is tightened to the tap thread and the copper pipe is fed into the end of the fitting. This is then soldered into place.

How do you use plumbers tape on plumbing fittings?

The trick to getting plumber’s tape right is to wrap it around the pipe in the proper direction. When the pipe is turned into the fitting, the friction of the mating threads should work to tighten the tape around the pipe, rather than work against it and unravel or ball up the tape.

How does a compression fitting tap connector work?

This is a compression fitting tap connector. The nut is tightened to the thread on the tap and there is a nut on the other end which contains an Olive. The Olive is fed over the end of the copper pipe and the nut tightened down onto it. See our project on compression joints to see how this works.