Do fluorescent fixtures need to be grounded?

do not need to be grounded as they don’t have an intimate connection with your wall socket, but… A fluorescent has such an intimate connection; the frame could easily come into contact with the electrically hot wire and fry your rear, just as easily as an incandescent light can.

What if my light fixture has no ground wire?

If by chance you are installing an electrical light fixture that has no ground wire into an electrical box with no ground wire as well, then simply connect together the hot wire from the electrical box to the hot (black or red) wire on the light fixture. Make sure to use wire nuts to attach the wires together.

How do you ground an ungrounded light fixture?

Basically, grounding is a connection between the metal body of a fixture to a continuous ground (wire or metal shielding) that returns to the service panel and an earth ground. You could create a ground on a fixture by installing a screw in the metal body of the unit that could then take the ground wire.

What can I use if I don’t have a green ground wire?

If you don’t have a wire coming in to hook your ground to, what you do is you take your ground wire which is either a solid copper or a green wire, you’ll take that ground wire and you wrap it around the ground screw. You can run it just on a two-wire system with your black and your white wires.

How do you ground a ballast?

If the ballast has no direct ground connection then you can use a blue (for #14 and #16 wire) stake-on fork on the stranded wire from the cord and attach it directly under the ground screw or you can wrap a short piece of solid green or bare #14 wire around the screw and attach it to the cord by a wire connector.

Can I attach ground wire to mounting screw?

Hook the screw loop around the green ground screw on your mounting bracket or light fixture and tighten the screw to hold it in place. If your light fixture has its own green ground wire you will need to connect the two ground wires using a wire nut.

Where do you connect ground wire if no ground?

What to do When there is Nothing to Attach the Ground Wire

1. When you have a ground wire and there is no place to attach it then place a wire connector over the end, coil up the ground wire and push it back into the electrical junction box.
2. IMPORTANT: Never cut the ground wire off.

Can you ground a light fixture to the box?

Check for Ground Your new light fixture will have a ground wire (green coated or bare copper). Adding a ground wire to the box isn’t difficult; just connect a six-inch section of bare copper wire to the box by driving a No. 10-32 ground screw into a threaded hole in the box.

Do you need to ground a ballast?

No, a ground is not needed. Heck, in some cases a fixture is not even needed. Back when LORAN was still used for navigation all you had to do was hold a fluorescent bulb in the air near the tower and it would light. As for the ground and it’s usefulness the neutral and ground wires tied together in the breaker box.

Does the ground wire have to be attached?

Grounding refers to the wire that runs from an outlet into the earth, inherently protecting homeowners from coming in contact with electric energy. No matter the method, it’s important that the ground circuit provides an unbroken path to the earth. Ground wires must be firmly connected at all points.