How do you remove skateboard wheels without skate tool?

Unscrew the nut that holds the wheel on the axle. If you don’t have a skateboard tool, or it doesn’t have a socket, use a crescent or socket wrench. Wheel nuts are usually ½” (13 mm), so use that size. Take the nuts off of all four wheels at once if you are changing all of the bearings.

Do you need a skate tool to change wheels?

You will need a suitable skate tool. You will also need bearings in your wheels – check the size of your axel to ensure correct fit. There are lots of reasons you might want to change your wheels, you may want a different hardness of wheel for skating in different locations or you might just want a change of style.

What tool do I need to loosen skateboard trucks?

Luckily, loosening and tightening your trucks is very simple, so you can easily make adjustments on the go and continually tweak it. All you need is a skate tool, socket set or spanner to turn the kingpin nut on the underside of your trucks.

Can you assemble a skateboard without a skate tool?

You can use a skate tool or the axles of your trucks to pop them in place, make sure you put them in all the way, they shouldn’t stick out. You should also use spacers to protect your bearings from getting crushed when you tighten the axle nut. Tools you need; A skate tool or your hands and your truck’s axle.

Do you need Skatetool?

Do You NEED a Skate Tool? Yes and No. You don’t necessarily need a skate tool, but at the very least you need 3 different sized wrenches, 1 screwdriver, and 1 size of Allen key. The nice thing about a skate tool is that it has all of these tools built into 1 convenient and easy to carry tool.

Is a skate tool worth it?

A skate tool is worth it because it saves you a lot of time assembling the different parts and maintaining components. They don’t take up much space and is an essential piece of gear any serious skater should carry.

What does a skateboard tool do?

A skateboard tool is a universal, multifunctional, T or Y-shaped tool with several pieces that come out and help you repair, tighten, or reassemble the skate or longboard. It will help you repair, replace, or fine-tune hardware items anywhere without having to get back home or walking to the nearest skate shop.

Why can’t I turn on my skateboard?

Check the tightness of your trucks. If your deck barely tilts, it means you have tight trucks, which will make it difficult to turn. If your board tilts easily, it means your trucks are loose; while looser trucks make turning easier, they also make your deck unstable and difficult to control.

Can you tighten trucks with a wrench?

If the whole truck turns and the baseplate slides, tighten the truck bolts. You will need either a Philips head screw driver or Allen wrench (hex key) for the bolt head. You’ll also need a 3/8-inch wrench or socket for the nut. Because of the precarious positioning of the bolts, a wrench usually works best.

Is assembling a skateboard hard?

Assembling your skateboard isn’t difficult once you understand how all the parts work together. Start by applying the grip tape to the deck, then screw in your trucks, and finally add the wheels and bearings.

What can I use instead of at tool?

Household Items You Can Use as Tools

• Hammer.
• Screwdriver.
• Wrench.
• Wire Cutter.
• Pair of pliers.