What happens if you take off without clearance?

Consequences. Taking off without ATC clearance may lead to: Runway Incursion – The aircraft may have been cleared only to the runway holding point. Rejected Take Off – The tower controller would likely observe the aircraft starting the take-off roll and may instruct the crew to cancel it.

What happens if an aircraft is too heavy?

Operating over weight will cause the aircraft to not meet the climb rates published in POH/AFM data, require longer runway distance for takeoff, lessen single-engine performance in a multi-engine aircraft, reduce glide distance in an emergency, and contribute to poor stablity if a stall is encountered, potentially …

What does it mean when a pilot says rotate on takeoff?

Pilots say rotate to indicate that the airplane has reached its rotation speed, which is the speed at which the airplane can take off safely without stalling.

What is your clearance limit when cleared for the approach and then you lose comms?

Your clearance limit is unchanged. It is still the destination airport. Even if you miss the approach, the clearance limit is still the airport.

Can you exceed Mtow?

MTOW can sometimes be exceeded, but not usually by a significant amount. For example, an aircraft can exceed MTOW when sitting on the ramp but must get rid of this weight before its brakes are released on the departure runway.

What could be a consequence of operating a small unmanned aircraft above its maximum allowable weight?

In addition, operating above the maximum weight limitation can compromise the structural integrity of an unmanned aircraft. reduced rate of climb, lower max altitudes, shorter endurance (fueling up more), reduced maneuverability.

What does it mean when pilots say heavy?

The term heavy is used during radio transmissions between air traffic control and any aircraft which has been assigned a maximum takeoff weight (MTOW) rating of 136 tonnes (300,000 lb) or more.