What is a fork heel?

Fork Heels When a load is applied, the forks flex and microscopic cracks are produced in the metal. Over time the metal fatigues and the cracks become larger.

What are the 3 major parts of a forklift?

The three major parts of a lift truck are the body (truck), overhead guard, and hydraulic lift.

How do you adjust forklift forks?

How Do I Make an Adjustment of Width of a Forklift Fork?

1. Determine the best setting for the forks on your forklift.
2. Raise the forks to a height of approximately 30 inches.
3. Raise the fork slightly.
4. Shift the fork slightly until it drops into the notch nearest the desired distance.

What are the parts of a forklift called?

Common Forklift Parts: The Terminology Primer

• Cab: The cab is the central part of the forklift.
• Carriage: The carriage mounts the forks to the mast and serves as a support structure for the forklift.
• Mast:
• Load Backrest:
• Forks:
• Overhead Guard:
• Tires:
• Counterweight:

Are forklift forks universal?

People who don’t work with forklifts all the time often assume that there is only one type of forks that fit onto lift trucks. There are actually many different types of forks, most of which are interchangeable depending on how you plan to use your forklift.

What are the different classes of forklift forks?

For the most part, there are three basic blade types that you should be familiar with: pallet, polished and tapered and plywood forks. The first thing that comes to mind when most people think about forklift forks are also the most commonly used type: pallet forks.

What is the Cage called on a forklift?

A forklift work platform is a unit or cage that is integrated (built in), or designed to be supported on the forks of a lift truck. Work platforms that are used to elevate (lift or raise) workers must provide appropriate support and safety measures.

What is the carriage of a forklift?

The forklift carriage assembly is where you mount the forks, load backrest and/or any forklift attachments to your lift truck. It’s important to know your forklift’s carriage class so you don’t accidentally buy the wrong forks or forklift attachments for your equipment.

Can you flip the forks on a forklift?

Just like Bubba in Forest Gump knows everything there is to know about the shrimping business, there is a lot to know about forklift forks. You can lift with them, sideshift them, fork position them, and even rotate them. Not to mention there are a variety of sizes, classes, and mounting types to choose from.

What are the 3 levers on a forklift?

Hydraulic Lift Knobs: Forklift has three basic controls knobs. One that lifts the forks up or down, the second one tilts the forks/blades down or up to secure the load, and the third to move the load side to side.

Are forklift forks standard?

Standard – This is the most common fork taper. It is perfectly suitable for picking up most pallets and skids. No beveling, normally, tapers begin 16″ to 24″ from tip and end with a 3/8″ tip.

How long do pallet forks need to be?

ANSI (American National Standards Institute) states that the forks you are using go at least 2/3rds the length of the load. For instance, a 4 foot long fork can pick up loads up to 6 feet. When doing this the load needs to be evenly distributed on the pallet or the heavier end must be closest to the forklift.