What is the top of a guitar called?

Headstock
Headstock. At the top of the neck is the headstock or peghead of the guitar, which holds the tuning pegs and keys that allow the guitar to be tuned. Headstocks can be straight or angled, and come in many different shapes depending on maker and model.

What are the parts of an acoustic guitar called?

In conclusion, an acoustic guitar has 14 parts in total. They are headstock, tuning keys, nut, frets, fretboard, neck, position markers, body, strings, pickguard, soundhole, bridge, saddle and string pegs. If you tend to purchase an acoustic guitar, you should opt for prestigious acoustic brands.

What is the head of a guitar called?

headstock
A headstock or peghead is part of a guitar or similar stringed instruments such as a lute, mandolin, banjo, ukulele and others of the lute lineage. The main function of a headstock is to house the pegs or mechanism that holds the strings at the “head” of the instrument.

What is the guitar bar called?

Bar: A metal rod attached to the bridge that varies the string tension by tilting the bridge back and forth. Also called the tremolo bar, whammy bar, vibrato bar, and wang bar.

What is the upper and lower bout of a guitar?

Bout – The curved areas at the top and bottom ends of an acoustic guitar body. The curves above the waist of the instrument are known as the upper bout and the bottom curves are called the lower bout.

Where is bridge on guitar?

The bridge is found on the lower bout of the body and forms one one end of the vibrating length of the strings, the other end being the nut, which is located at the end of the fretboard.

What is the parts of a guitar called?

Every guitar is a little different, but there are three fundamental parts — the headstock, the neck, and the body.

What is a headless guitar?

Unlike on common guitars, where the tuners are placed on the headstock, on a headless guitar or bass the strings are fixed just beyond the nut, so there is no head necessary. The strings then go over the nut, up the neck, over the bridge, and are connected to tuners on the body.

What are the cutouts on a guitar called?

A cutaway on the guitar construction is an indentation in the upper bout of the guitar body adjacent to the guitar neck, designed to allow easier access to the upper frets.

What is the sound box of a guitar called?

soundboard
soundboard, also called Belly, a thin plate of wood or a stretched membrane lying directly under the strings of a stringed musical instrument.

What are the sections of a guitar called?

What is the hole in the top of an acoustic guitar called?

The hole in the top of an acoustic guitar is called the soundhole. The hollow body of an acoustic guitar allows the bass frequencies produced from the strings to resonate and be amplified and then project through the soundhole, while the top acts to enhance the mid and high frequencies.

What is the headstock of a guitar called?

Acoustic Guitar The first section of the guitar is called a headstock, on which you will find tuners and tuning pegs. The tuning pegs allow you tune the guitar by tightening or loosening the wires. The middle, narrow section of the guitar is called the neck.

What is the body of an acoustic guitar made up of?

The body of an acoustic guitar is made up of the soundboard, or top, and the back and sides.

What is the middle part of the guitar called?

The middle, narrow section of the guitar is called the neck. The nut is the white strip closest to the headstock. The front side of the neck is called the fretboard. And the metal wires on the fretboard are called the frets, which help your fingers find the right spots.The biggest part of the guitar is called the body,…