How do you remove a Briggs flywheel?

With the flywheel nut threaded onto the crankshaft, install a flywheel puller so its bolts engage the holes adjacent to the flywheel’s hub. If the holes are not threaded, use a self-tapping flywheel puller or tap the holes using a 1/4 X 20 tap. 5. Rotate the flywheel puller nuts evenly until the flywheel pops free.

Can you use heat to remove a flywheel?

Some pullers are just a hardened bolt that threads into the flywheel. Corrosion, heat cycling, or over-torquing the fixing bolt can make the flywheel difficult to remove. Many mechanics resort to using a large breaker bar or air impact tools when a flywheel won’t come off easily.

What is a flywheel puller?

Flywheel pullers are essential engine service tools and they are used in a lot of different jobs. Most pullers are simple tools, usually consisting of an outer body that attaches to the flywheel and a lead screw to push on the crankshaft. Some pullers are just a hardened bolt that threads into the flywheel.

How do you remove flywheel on lawn mower?

Turn the center bolt slowly on the jaw-style puller while making certain the jaws do not slip off the flywheel. With either style puller, the flywheel will eventually lose its friction fit with the shaft and flywheel key. Remove the puller assembly, and lift the flywheel straight up and off of the mower.

Do lawn mowers need a muffler?

If you need a new lawn mower muffler, exhaust manifold, muffler guard, or exhaust pipe, Jack’s has the parts to keep your equipment quiet. A small engine muffler helps reduce the noise level of your generators, lawn mowers, chainsaws and other power equipment.

How do you remove oil from lawn mower?

Wipe away any grass or other debris from your oil drain plug. Use a wet cloth and some elbow grease to remove tough, stuck-on debris. On most mowers, the oil drain plug is below the deck. Wiping debris away from the drain plug helps protect your crankcase from becoming contaminated.

Where is the solenoid on a craftsman lawn mower?

Related Articles. Look along the mower’s frame or back of the engine compartment to locate the solenoid. On most models, the solenoid is a cylindrical or square palm-sized black device bolted to the mower frame near the engine or bolted on at the back of the engine compartment near the battery.