Q&A

Can I mix and match RAM from different manufacturers?

Can I mix and match RAM from different manufacturers?

As long as the types of Ram you mix are the same FORM FACTOR (DDR2, DDR3, etc) and voltage, you can use them together. They can be different speeds, and made by different manufacturers.

Do RAM sticks have to match brand?

Most modern motherboards will provide four RAM slots. There’s a prevailing misconception you cannot use different RAM sizes together or that you cannot mix RAM brands. For the best system performance, it is advisable to use RAM sticks by the same manufacturer, of the same size, and of the same frequency.

Can you mix and match RAM Mhz?

You can use memory modules of different speeds as long as they are faster than those specified for your computer. It is recommended to use modules of the same speed as those already installed in your system. For example, for a DDR2 667MHz system you could add 800MHz modules, they will run at the 667 speed.

Is it okay to put 2 different RAM brands?

Your computer is likely to run fine if you mix different RAM brands, different RAM speeds, and different RAM sizes. However, if you are going to buy a new RAM stick, it would benefit you to just buy something that is compatible. So at the end of the day, yes you can mix RAM brands as long as you are careful.

READ:   Why are refried beans fried twice?

Can I use 2 different RAM brands?

Can You Mix Different RAM Brands? In short, the answer to this question is: yes. The only RAM characteristic that will certainly cause incompatibility between RAM modules is the memory type. Different generation RAM sticks – like DDR3 vs DDR4 – will not work together.

Can you use 2 different brands of RAM?

Can you use 2 different types of RAM?

Yes you can use two different brands of RAM in a PC but you should make sure that they both are compatible for your PC. For example you should make sure which RAM will your mobo supports for example if your motherboard support ddr3 then you should insert both of your RAM must be ddr3.

Can I use 2 RAM with different MHz?

Yes, you can. A prerequisite first: BOTH sticks need to be of the same generation, e.g. BOTH have to be DDR3, DDR4, etc. If you got that nailed down, it’s pretty simple afterwards: you just plug both sticks into the system. The faster stick will operate at the frequency of the slower stick.

READ:   Does topical flea treatment hurt dogs?

Is it OK to mix RAM brands?

Can You Mix Different RAM Brands? In short, the answer to this question is: yes. No matter the brand, speed, and size of the RAM, you theoretically can get it to work on your system; though it may prove to be problematic. Also, depending on the setup & workload, you may not even notice a difference in performance.

Can I mix DDR3 and DDR4?

Yes, they would work with each other. Although, it’s not recommended to use different generation RAMs. The highest speed of DDR3 RAM is 2133Mhz whereas DDR4 speed starts from 2133Mhz. It is recommended to use memory with same value, speed & generation for best performance.

Can you use DDR2 and DDR3 RAM together?

Although DDR3 and DDR2 are both 240Pin modules, they have different electrical designs, operating voltages and memory slots. Therefore, DDR2 and DDR3 cannot work together on the same motherboard.

Can I use two 4GB RAM sticks and two 8GB sticks at the same time?

As long as you have 4 available memory slots, yes you can use 2 8GB memory modules and 2 4GB memory modules at the same time. This does ASSUME that both sets of memory are compatible.

READ:   What is the most secure USB?

Can you use different brand Ram sticks together?

Yes, you can use different brand RAM sticks together, even if they don’t have the same size. However, using mismatched RAM modules may negatively affect the performance and stability of your computer for the reasons we describe in detail in this article. How To Check RAM on Linux?

Can I use different brands of RAM with different speeds?

Some motherboards and specific OEMs might not function with RAM modules of different speeds and timing but they are pretty rare. Also you can mix brands with modules having the same timing and speed without much compatibility issues. Also ideally you should have similar modules on the same channel if you are using more than 2 sticks of RAM.

Can I use different frequencies of RAM on the same motherboard?

The potential problem is not related to using different frequencies of RAM; any motherboard will fall back to the speed of the slower memory module (DIMM).

Is it safe to mix Ram brands?

In general, we suggest only mixing RAM brands if you are going to save up to get more RAM of the same brand or you do not have any other options. No matter what you do, your computer will always perform to the abilities of the lower quality RAM.