Q&A

Why is my Macbook Pro not reading my external hard drive?

by Author

Why is my Macbook Pro not reading my external hard drive?

Your external hard drive is not readable on Mac because it is formatted in NTFS, HFS+, or another format not supported by macOS. A loosely connected or frayed USB cable is another possible reason the external drive is not recognized by your Mac. Change the cable to fix the issue.

How do I fix an undetected Seagate external hard drive?

Quite often, issues such as a Seagate external hard disk light blinking but not being detected can be fixed by simply rebooting the computer. To do this, disconnect your external hard drive from the computer. Now turn off the PC for at least 1 minute. Then reconnect the external hard drive and turn on the computer.

What do I do if my external hard drive is not detected?

Here are a few troubleshooting steps you can take to remedy the situation.

  1. Make Sure It’s Plugged In and Powered On. Western Digital My Book.
  2. Try Another USB Port (or Another PC)
  3. Update Your Drivers.
  4. Enable and Format the Drive in Disk Management.
  5. Clean the Disk and Start From Scratch.
  6. Remove and Test the Bare Drive.
READ:   How do I claim ITC from regular to composition?

Why can’t I see my USB drive on my Mac?

If your flash drive or external hard drive is not showing up there, go to Finder > Preferences > Sidebar, and under Locations, you need to tick the option “External disks”. By selecting this option, we can make sure that the connected external USB hard drive or flash drive will normally show up in the Finder.

What do I do if my hard drive is not detected?

What to Do When Your External Hard Drive Won’t Show Up

  1. Make Sure It’s Plugged In and Powered On. Western Digital My Book.
  2. Try Another USB Port (or Another PC)
  3. Update Your Drivers.
  4. Enable and Format the Drive in Disk Management.
  5. Clean the Disk and Start From Scratch.
  6. Remove and Test the Bare Drive.

How do I fix my external hard drive not being recognized?

External Drive Not Showing Up or Detected? 6 Fixes to Try

  1. Make Sure Your External Drive Turns On. This is a preliminary step, but still one worth checking.
  2. Check the Drive in Disk Management.
  3. Try Another USB Port and Computer.
  4. Troubleshoot Device Driver Issues.
  5. Create a New Drive Volume.
  6. Format the External Drive.

How do I reset my Seagate external hard drive?

Reset using the button

  1. Power down the Seagate Central by unplugging it from power.
  2. Wait approximately 15 seconds.
  3. Power up the Seagate Central again.
  4. Wait for the device to fully boot and show a steady, non-blinking green light. This takes about three to four minutes.
  5. Wait until the light becomes solidly illuminated.
READ:   What was the vision that Ezekiel saw?

How do I get my hard drive to show up on my Mac?

Go to the Menu bar, and then, move to “Finder”. Next, click on the “Preferences” option. Next, select the “General” tab when the Finder preferences window appears on your Mac screen. After that, check the box “Hard disks” under “Show these items on the desktop”.

How do I reset my Seagate External Hard Drive Mac?

Mac

  1. Make sure the storage device is connected to and mounted on the computer.
  2. Select Go > Utilities in the Finder menu bar.
  3. In the Utilities folder, double-click Disk Utility.
  4. Select the Seagate drive in the left column.
  5. Click the Erase tab.
  6. Choose a format from the drop-down window.
  7. Enter a name for the volume.

How do I restore my Seagate 2tb external hard drive?

Reset using the Seagate Central Assistant

  1. Log in with your credentials.
  2. Select the Settings tab.
  3. Select the Restore button. This will restore the device settings to default values.
  4. Proceed with initial setup.

Can’t access Seagate external hard drive on Mac?

First things first, check if the Seagate external hard drive that is not showing up Mac is properly plugged in to the USB port . It is one of the most notable reasons when Mac fails to mount the drive. If you are using an older Mac ensure that the drive is receiving enough power supply.

READ:   Can we add cold water in air cooler?

Why is my USB drive not detected?

After connecting an external hard drive to a USB 3 Port, they have found that the computer does not read it. The drive is not recognized by the OS and is no more visible in Windows Explorer. Possibly, the reasons could be due to issues with the USB drivers installed on the computer.

How to access Seagate external drive?

Use the correct USB cable to connect the Seagate external hard drive to your Windows PC.

  • Run EaseUS Data Recovery Wizard,it will load the external drive and display it under the Devices section.
  • All you need to do here is to select the Seagate external hard drive and then click the Scan button.

    • Why is my Seagate hard drive blinking?

    Method 1. Check the Power Supply. If there is a power supply issue, your external hard drive won’t blink at all when you connect it to your computer.

  • Method 2. Take the External Hard Drive Out of Its Enclosure Case. The external hard drive you are using actually contains your external hard drive itself and its enclosure.
  • Method 3. Ask for a Replacement. If the two tips above don’t work, it’s highly likely that your hard drive is dead.