Can you change blade size on a ceiling fan?

Fan blades come in a range of sizes from under 42-inches to over 60-inches. While you can choose a longer fan blade replacement, it’s important to note that your fan’s motor is most responsible for the airflow, and bigger blades won’t make much difference when it comes to cooling your room.

Can I replace my ceiling fan blades with longer ones?

Even though it is possible, it is not recommended to put longer blades on a ceiling fan. This is because longer blades increase the load on the fan’s motor, causing it to burn out. Even if you manage to run the fan without damaging the motor, it is likely to be less energy efficient.

What size blades are on a 52 ceiling fan?

Ceiling Fan Size Guide

Blade Span	Good for	Room Size
29″ to 36″	Bathrooms, Breakfast Nooks, Utility Rooms	Up to 75 sq. ft
42″ to 48″	Bedrooms, Kitchens, Dining Rooms	Up to 175 sq. ft
52″ to 56″	Large Bedrooms, Family Rooms, Media Rooms	Up to 350 sq. ft
60″ or larger	Great Rooms, Other Large Spaces	More than 350 sq. ft

Can you replace ceiling fan blades with smaller blades?

With the smaller blades, the fan will probably run faster at the low speed and may be noisier. You might also consider new arms with the new blades. Balance is the key, if you modify the blades by re drilling and they are not matched your likely to get some wobble or noise!

Can you put Shorter blades on a ceiling fan?

The most common ceiling fan blade spans are 52 and 42 inches. Longer blades work best for larger rooms and create softer, more comfortable airflow. Shorter blades offer more direct airflow and are ideal for smaller rooms.

Are fan blades universal?

No, they are not universal. It’s because ceiling fans are made by different manufacturers and thus come in different unique designs. To find the appropriate replacement, you should check on the hole patterns; they should be the same as the replacement.

Is 52 inch fan too big?

The ALA recommends a 29- to 36-inch fan for a room up to 75 square feet, such as a bathroom; a 36- to 42-inch fan for a medium-size room up to 144 square feet; and a 50- to 54-inch fan for a room around 225 square feet; 54- and 60-inch or larger fans are available for larger spaces.

Does ceiling fan blade size matter?

The most common ceiling fan blade spans are 52 and 42 inches. Longer blades work best for larger rooms and create softer, more comfortable airflow. Shorter blades offer more direct airflow and are ideal for smaller rooms. The volume of air is not determined by blade span, but by the motor.

Are fanimation blades interchangeable?

Due to the nature of the high quality materials used and the handcrafted process these fan blades go through, no fan blade set will be exactly the same, making your fan blades unique to you and your own home.

Is bigger blade fan better?

Blade Span Longer blades work best for larger rooms and create softer, more comfortable airflow. Shorter blades offer more direct airflow and are ideal for smaller rooms.

How do you buy ceiling fan blades?

Fan blades must be weighted and matched as a balanced set to avoid having your fan wobble. Ceiling fans with less than a 12 degree angle will not circulate air as well and be less efficient. The greater the angle or higher the pitch of the blade the more air circulation you will have in your room.

How do you replace a ceiling fan blade?

According to the Home Guide at San Francisco Gate, a ceiling fan blade can be replaced using a ladder or a set of steps and a screwdriver, along with the new blade. The old blade needs to be unscrewed and removed prior to the new one being set in place.

What size ceiling fan blades do I Need?

For rooms with tall ceilings, you need to choose a fan that uses a downrod to suspend it far from the ceiling. For adequate air circulation, the fan blades should hang 8 inches or more from the ceiling. For safety, the bottom of the fan needs to be at least 7 feet above the floor.

How to replace fan blades?

– Install your first replacement fan blade using the old screws. Use new screws of the same size if you prefer a different finish. – Continue installing your new fan blades one at a time. – After replacing ceiling fan blades, always check to make sure they are firmly in place before turning your fan on. – Inspect for any awkward movement or wobbling in your new fan blades before cleaning up.

How to measure for a ceiling fan?

If necessary, turn the fan off and wait for it to stop spinning before measuring.

Standing on a step ladder as needed, hold one end of a tape measure to the tip of a fan blade on a fully assembled fan.

If the unit has an even number of ceiling fan blades, extend the tape measure to the end of the opposite blade and…