How much space is needed either side of a wood burning stove?

In terms of the distance between the stove’s external surfaces and surrounding walls, the minimum to the rear and sides is 150mm.

Can you put a wood stove in front of a fireplace?

Stoves can be added to a fireplace in several ways. Free-standing stoves can be installed so that the stove pipe enters into the fireplace chimney above the damper, through the damper or into the firebox below the damper. Properly designed stoves can also be inserted into the fireplace opening.

Can a wood stove go in a corner?

Corner wood burning stoves and electrical corner stoves can be positioned in the corner of the room, either to free up space or to act as a focal point. They often have a 90 degree angle glass facade that enables the flame to be seen from all areas of the room.

How far does a wood stove need to be away from a non combustible wall?

36 inches
The standard clearance recommended by the National Fire Protection Agency is 36 inches. This means that the back of the stove should be 36 inches away from any combustible material, such as woodwork, unprotected walls, furniture and even firewood.

Can you put a wood burning stove in a small room?

However, there’s no need to panic! As long as you keep your small wood burning stove at least 400mm away from any combustible material – and providing that you take the appropriate care and attention when it comes to lighting, refuelling and operating your stove – then you don’t have anything to worry about.

Can I put a small wood stove in my fireplace?

Chimney and Flue Size You can only fit a wood burner in your fireplace if it has a class 1 chimney. If you had an open solid fuel fire previously, this should be the case anyway! If you are replacing a gas fire, check to make sure it isn’t a class 2 or pre-cast flue, as these won’t be suitable for a stove.

Can you convert a wood stove to a fireplace?

1) You can use your existing chimney for gas. 2) You cannot convert a wood burning stove into a gas burning model. It’s one or the other. The interior has been specifically designed to meet combustion & safety requirements (gas standards) so that it’s safe, burns clean, and provides you with a wood-like flame.

How far does a kitchen stove have to be from the wall?

There should be two inches of space between the back wall and a drop-in or slide-in (gas or electric) style range. A freestanding range (gas or electric) requires no space between it and the back wall. There should be at least twelve inches between any style range and the closest sidewall.

Can you vent wood stove horizontally?

Venting is an important component of all stoves. And wood, gas, and pellet stoves have different venting systems. For instance, wood-burning stoves will always be vented through the roof of your house, but pellet-burning stoves can be vented vertically through the roof, or horizontally through the wall to the outdoors.

How close can a stove be to a wall?

There should be two inches of distance between the rear wall and a drop-in or slide-in (gas or electric) design range. A freestanding range (gas or electric) demands no space between it and the rear wall. There should be at least twelve inches between some fashion range and the nearest sidewall.

What do you put on the wall behind a wood stove?

Type X drywall is a common material used for wood stove installations. Type X is a gypsum-based drywall that is 5/8 inch thick and is installed on each side of a 2-inch by 4-inch wood stud, spaced 16 inches on center or spaced 24 inches on center.

Can a wood burning stove be installed inside an existing fireplace?

With the right size of fireplace opening and the right chimney, wood burning stoves can be installed inside existing fireplaces.

Can I use my existing chimney for venting a wood stove?

There needs to be a secure channel through which smoke and gasses can exit the house. Typically this is accomplished with a stove pipe. Some wood stove buyers wonder if they can use the chimney connected with their existing fireplace for venting a new wood stove.

What size fireplace opening do I need for a wood burner?

The exact fireplace opening size you need for your wood burner depends on what size stove you want. You need to be able to leave enough space around the stove to provide the required distance to combustibles and to ensure an adequate air supply is available to the stove.

What should I look for when buying a wood burning stove?

Be sure to check the diameter of the flue in your existing fireplace before you buy your stove