Is it safe to use apartment fireplace?

For apartment safety, you want to be sure that there’s a barrier between the fire and the outside area. With sparks and embers flying out from time to time, there’s a small chance that a piece of furniture might catch fire. So take every step possible to cover the front area of the fireplace.

How do you use a fireplace for the first time?

Ignite your first fire by using a long-handled lighter or matches to ignite the newspaper and kindling. Use a fireplace poker to stir the sticks as needed until the larger logs ignite. Do not leave a fire unattended. Ensure the fire is fully extinguished before leaving the house or retiring to bed for the night.

What to know about using a fireplace?

8 Things You Should Know About Fireplace & Chimney Care

• Call A Chimney Sweep. They exist, and not just to pop up in children’s movies.
• Leave A Little Ash.
• Keep The Area Clear.
• Close The Damper.
• Make Sure You Have A Chimney Cap.
• Only Use Seasoned Wood.
• Don’t Hang Stockings.
• Consider A Fireplace Insert.

How do fireplaces in apartments work?

Here are some tips to maintain apartment safety when you have a fireplace.

1. Make sure smoke alarms are in working order.
2. Use a mesh screen.
3. Keep the fireplace area clear.
4. Never start a fire with gas or other flammable liquids.
5. Have a fire extinguisher on hand.
6. Use the damper correctly.
7. Be careful what you burn.

What is the damper on a fireplace?

A chimney damper prevents conditioned (warmed or cooled) house air from escaping through the flue when you’re not using the fireplace. You need to open the damper when you start a fire to allow for proper airflow and let the smoke out.

How do I prepare my fireplace for fire?

How To Prep Your Fireplace For the First Fire of the Season

1. Before your fire: Hire a chimney sweep annually to inspect your chimney for damage and clean out any accumulated dust or soot to prevent a chimney fire.
2. Before your fire: Check your gaskets.
3. Before your fire: Clean the blower.

Do you need to open a window when using a fireplace?

Open a window when using the fireplace to prevent the room from becoming smoky. The window needs to be open only a few inches. You can check to make sure the smoke will go up the chimney properly by lighting a match, quickly blowing it out and watching the smoke to see whether it’s going up and out.

How do I make sure my fireplace is out?

Instead, you should:

1. Use a fireplace poker to spread out the embers.
2. Put ash over the embers to smother the fire.
3. Apply a thin layer of baking soda over the fire.
4. Let the ashes cool off and place them in a metal container.
5. Store the container outside your home away from anything flammable.

How do you start a fire in a new fireplace?

Using a new fireplace. For a fire pit, wait 24 hours before building your first fire. This allows the construction adhesive used to secure the block to set. The first three fires need to be small, starting with a fire that lasts about 20 mins and then slowly cools. The following fire can be progressively bigger, burning longer.

What to do if you have a fireplace in an apartment?

Contact your landlord if the fireplace does not appear to have been used in some time or if you are uncertain about the condition and operation of the damper. Do not attempt to light a gas or wood fire unless you are positive the damper is open and working properly. An apartment fireplace offers a cozy was to relax.

Do I need a screen around my fireplace?

Sparks and embers can be as hot as a roaring fire, and a screen is your first defense against floating embers. Keep your pretty (albeit flammable) decorations far away from the fireplace when in use. You’ll also want to have your chimney inspected by a licensed chimney sweep (or ask your landlord to provide proof of one). Why?

How do I break in my new fireplace?

Here’s how to appropriately break in your new investment: As tempting as it is, don’t build a fire the day your new fireplace is installed. For a fire pit, wait 24 hours before building your first fire. This allows the construction adhesive used to secure the block to set.