Is Smelly water safe to drink?

In most cases drinking water that has a strong rotten egg odor, although particularly unpleasant, is perfectly safe to drink. However in some rare occasions the odor may be caused by sewage or other contaminates in a building’s water supply, which could cause health problems.

Why does my well water smell like manure?

Yes. Manure contains bacteria and viruses that are an acute (serious and immediate) hazard to your health. If the water smells like manure and the water tests positive for fecal bacteria or E-coli, contact a DNR water supply specialist immediately.

How do I fix my smelly well water?

To fix well water that smells bad, use one of these approaches:

1. Aerate water and/or inject air or oxygen.
2. Chlorinate well water to eliminate both sulfur and bacteria.
3. Use ozone gas in a closed tank or atmospheric tank.
4. Inject hydrogen peroxide.

Why does my well water smell like rotten eggs?

If your water smells like rotten eggs, that likely indicates the presence of hydrogen sulfide gas. This could be due to a problem with your water heater or naturally occurring sulfur bacteria, especially in well water. These issues can produce hydrogen sulfide, which leaves an unpleasant scent wherever it goes.

Is it safe to shower in water that smells like sulfur?

It’s perfectly safe to shower in sulfur water. Doing so won’t endanger your health or wellbeing. Having said that, the presence of sulfur water in your plumbing might cause it to rust or corrode over time. Especially if the sulfur water contains high amounts of hydrogen sulfide.

Is well water safe to drink?

Well water can be safe for drinking and all other household needs, as long as you make sure to test your water supply regularly and select treatment solutions in line with your results. Learn more about the well water treatment options that are available for your specific needs.

Is well water safe to shower in?

If your water at home is from a private well or small community well, you should boil the water or use approved bottled water for drinking. Sometimes a well is more likely to become contaminated with bacteria. Bathing is not a problem using well water.

How do you tell if your well water is contaminated?

Visible Signs to Look Out For

1. Scale or Scum. Scale buildup or a scummy feeling from water is often associated with calcium or magnesium.
2. Unclear or Turbid Water.
3. Green Stains on Sinks or Faucets.
4. Brown or Red Stains on Sinks, Clothes, or Dishwasher.
5. Salty Taste.
6. Soapy Taste.
7. Chemical Taste.
8. Metallic Taste.

Can I pour bleach down my well?

Mix 2 quarts bleach in 10 gallons of water; pour into well. Connect a garden hose to a nearby faucet and wash down the inside of the well. Open each faucet and let the water run until a strong chlorine odor is detected, then turn it off and go to the next one. Pour it into the well without pumping.

How do you remove sulfur from well water?

Chlorine bleach can effectively remove medium to high levels (over 6 mg/l) of hydrogen sulfide. The chlorine in the bleach chemically reacts with (oxi- dizes) the hydrogen sulfide eliminating the “rotten egg” odor. Chlorine bleach also reacts with iron or manganese, and disinfects water supplies.

How do you remove Sulphur from well water?

Shock your well with chlorine bleach or hydrogen peroxide to get temporary relief from sulfur odors. Often keeps odors away for 1 – 2 months. 2. Chlorinator: Install a chlorine injector system (chlorinator) on your wellhead for continuous injection of chlorine when the water is running.

Is well water safe to bathe in?