What should be the camshaft speed in four stroke engine and why?

On a 4 stroke internal combustion engine the camshaft turns exactly half the speed of the crankshaft.

How does a camshaft rotate?

A cam, in its simplest definition, is a mechanical link that converts rotational motion into linear motion, or vice versa. The cams on a camshaft achieve this displacement by the rotation of a radial pattern, and a follower which moves perpendicular to the rotational axis.

What causes the crankshaft to rotate?

The gas-air mix passes through an intake manifold and is distributed, through intake valves, into the cylinders. The distributor makes the spark plugs spark, which ignites the fuel-air mix. The resulting explosion forces a piston to move down which in turn causes the crankshaft to rotate.

What is the relationship between camshaft speed and crankshaft speed in 2 stroke engine and 4 stroke engine?

Camshaft is driven by crankshaft by means of gears, chains or sprockets (Fig3). The speed of the camshaft is exactly half the speed of the crankshaft in four stroke engine. Camshaft operates the ignition timing mechanism, lubricating oil pump and fuel pump.

Do cams spin faster than the crank?

Because one turn of the camshaft completes the valve operation for an entire cycle of the engine and the four-stroke-cycle engine makes two crankshaft revolutions to complete one cycle, the camshaft turns half as fast as the crankshaft. …

What spins faster crank or Cam?

Engine valves Car engines burn fuel with air to release energy that roars us down the road. A typical car has 4–8 cylinders in which the power is made. They suck in fuel and air one minute, burn it to make power, and blast out exhaust gases the next.

What is the speed ratio of camshaft to crankshaft?

A camshaft on a four stroke engine runs at 1/2 the crankshaft speed , the intake and exhaust valves opens once (each) for each two engine revolutions. In a two stroke engine, it is one to one. Traditionally, a crankshaft rotates twice for one rotation of the cam.

How many times does a camshaft rotate?

If the engine is four cycle (intake, compression, power and exhaust strokes), the camshaft rotates at one-half of the crankshaft’s speed, 50 times. If the engine is two cycle, the camshaft rotates at the crankshaft’s speed, 100 times.

What is the difference between the camshaft and crankshaft?

A camshaft uses egg-shaped “cams” to open and close engine valves (one cam per valve), while a crankshaft converts “cranks” (the up/down motion of the pistons) to rotational motion.

Why do engines rotate clockwise?

However, front-engine front-wheel drive car engines typically rotate clockwise because it eliminates the need for an idler to make the output shaft rotate in the right direction for the transaxle, and ultimately the wheels.

How many times does the camshaft rotate in a 4-stroke cycle?

During the four-stroke combustion cycle (intake, compression, power and exhaust) the crankshaft turns twice — moving each piston up and down twice — while the camshaft turns once.

When the crank shaft of 4-stroke running at 1500 rpm the camshaft will run at?

Mechanical Engineering Civil Engineering ECE EEE CSE Read more…

https://www.youtube.com/watch?v=OGj8OneMjek