How fast can a 2N2222 switch?
Table of Contents
- 1 How fast can a 2N2222 switch?
- 2 How much current can a 2N2222 transistor handle?
- 3 What does 2N2222 transistor do?
- 4 What electronics use 2N2222 transistor?
- 5 Which transistor can be used in place of 2N2222?
- 6 What is the difference between 2N2222 and 2n2222A?
- 7 What is the maximum frequency handling capacity for 2N2222?
- 8 What is the base voltage of 2N2222?
How fast can a 2N2222 switch?
The 2N2222 has a combined rise-time, fall-time, and storage-time of 310ns, thus the maximum switching frequency is about 3MHz so it’s not appropriate for this application.
How much current can a 2N2222 transistor handle?
It’s a current controlled transistor. It has a Collector current of 800 mA. Power Dissipation of 2N2222 is 500mW. It can operate between -65 C to 200 C temperature.
What is the frequency limit of transistor?
GaAsFETs can be used from below 1 GHz to beyond 18 GHz whereas the BJTs can operate up to about 10 GHz. Research on high electron mobility transistors (HEMT) and GaAs heterojunction bipolar transistors (HBT) in recent years has promised the potential application of ‘transistors’ at millimetre-wave frequencies.
What is the beta value of 2N2222 transistor?
In this experiment we measure the constant β ≡ Ic/Ib for a 2N2222 transistor. We show that β is in fact constant in the linear regime and equal to approximately 190. In addition, we show that the linear regime is realized for base currents of Ib < 50 μ A and that in this regime the voltage hierarchy is satisfied.
What does 2N2222 transistor do?
The 2N2222 is a common NPN bipolar junction transistor (BJT) used for general purpose low-power amplifying or switching applications. It is designed for low to medium current, low power, medium voltage, and can operate at moderately high speeds.
What electronics use 2N2222 transistor?
2N2222 NPN transistor has been commonly used for switching and very high frequency(VHF) amplifier applications. It is made of silicon material and specially designed for low voltage, low to medium current and low power amplifier applications.
Can I use 2N3904 instead of 2N2222?
Usually a 2N3904 will suffice for most circuits, but if you need more than 200mA, then you should use a 2N2222 instead….2N3904 vs 2N2222.
2N3904 | 2N2222 | |
---|---|---|
Type of BJT | NPN | NPN |
Maximum current that the transistor can handle from the emitter to the collector (called collector current, Ic) | 200mA | 1A |
Can we use BC547 instead of 2N2222?
You can update the circuit at anytime, you can replace the 2n2222 NPN transistors with the BC547 and it will have no negative effect on the project.
Which transistor can be used in place of 2N2222?
The 2N2907 is an equally popular PNP transistor complementary to the 2N2222. The 2N3904 is an NPN transistor that can only switch one-third the current of the 2N2222 but has otherwise similar characteristics.
What is the difference between 2N2222 and 2n2222A?
The 2n2222A is a slight bit better in terms of Vceo, Vcbo, Vebo. But if you are not planning on stressing the part (higher voltages, etc) both will work well, especially for simple switching and logic circuits. The 2n2222 part is the older style part which might be the reason they are being offered at a low price.
What does 2n2222 transistor do?
What is the power dissipation of a 2N2222 transistor?
Total power dissipation of the device should not exceed above 500 mW. hFE or the dC current gain of 2N2222 transistors will be around 7 5 minimum, at voltages near 10, with 10 mA collector current. Maximum frequency handling capacity or the transition frequency is 250 MHz for 2N2222 and 300 MHz for 2N2222A.
What is the maximum frequency handling capacity for 2N2222?
Maximum frequency handling capacity or the transition frequency is 250 MHz for 2N2222 and 300 MHz for 2N2222A. · The base-emitter saturation voltage for 2N2222 is typically 1.3 volts @ 15 mA, when the collector current is around 150 mA. With collector current exceeding 500 mA, the base optimal trigger voltage becomes 2.6 volts.
What is the base voltage of 2N2222?
· The base-emitter saturation voltage for 2N2222 is typically 1.3 volts @ 15 mA, when the collector current is around 150 mA. With collector current exceeding 500 mA, the base optimal trigger voltage becomes 2.6 volts.
Is 2N2222A the same as 2n2n2222a?
Both parts are about the same. The 2n2222A is a slight bit better in terms of Vceo, Vcbo, Vebo. But if you are not planning on stressing the part (higher voltages, etc) both will work well, especially for simple switching and logic circuits.