How many bags of cement do I need for 1 cubic yard?

# It takes approximately 5 Bags of Portland cement, 8 cubic ft of sand, and 20 cubic ft of gravel to make approximately 1 cubic yard (27 cubic feet) of concrete.

How much cement goes in a yard of concrete?

To make 1 cubic yard of concrete, you’d need seven 94-pound bags of cement, about 1/2 cubic yard of sand and just over 3/4 cubic yard of gravel.

How much does a cubic yard of cement cover?

How much concrete is in a yard? Concrete volume is measured in cubic yards. When poured on a perfectly level surface, one cubic yard will cover 27 square feet at one foot thick.

How many tons of cement are in a cubic yard of concrete?

Equals: 1.27 short tons (sh tn) in mass. Converting cubic yard to short tons value in the Portland cement units scale.

How many yards of concrete do I need for a 24×24 slab?

7.11 yards
For example, for a concrete slab that is 24′ X 24′ X 4”, simply enter 4 in the Thickness/Depth field, 24 in the Width field, and 24 in the Length field. Click “Calculate”. Your answer should be 7.11 yards. Note: The Concrete Volume Calculator can also be used to determine yardage for aggregate products.

How many bags of concrete is 2 cubic yards?

One 80lbs bag of Quikrete Concrete Mix will yield approximately . 60 cu ft. So it will take 45 bag to equal one cubic yard of concrete. If you have a project over a 1/2 a cubic yard you should consider our Mix On-site Concrete especially if you are hand mixing.

How many yards of concrete do I need for a 10×10 slab?

1.3 cubic yards
The amount you will need for a 10 x 10 slab is 1.3 cubic yards, we always add an extra 10\% to allow for any slab depth variations or spills that may occur.

How many tons is 4 yards of concrete?

Cubic yards to tons for common materials

Material (1 yd3)	Density Estimate	US tons
Concrete	140 – 150 lb/ft3	1.89 to 2.03
Dirt	65 – 80 lb/ft3	0.88 to 1.08
Gravel (loose, dry)	75 – 95 lb/ft3	1.01 to 1.28
Gravel (dry 1/4 to 2 in)	105 lb/ft3	1.42

How much concrete do I need for a 10×10 slab?

Regarding this, “how much concrete do i need for a 10×10 slab?”, generally you will need 1.23 cubic yards of premixed concrete for a 10×10 slab at 4 inches thick, at 5 inches thick you will need 1.54 cubic yards of concrete and at 6 inches thick – 1.85 cubic yards of concrete.

How many 50lbs bags of concrete make a yard?

The number of bags you need will vary depending on the type of concrete mix you choose for your project. If you’re using 50lb bags of concrete, you’ll need 72 bags to make a yard.

What is the cost of 1 yard of concrete?

Concrete costs an average of $117 per cubic yard, with a typical range between $104 and $144 per cubic yard. Concrete costs an average of $117 per cubic yard, with a typical range between $104 and $144 per cubic yard.

How many yards of concrete do I need for a 24×24 garage?

For an approximate idea of how much concrete you need, use the Concrete Volume Calculator below. For example, for a concrete slab that is 24′ X 24′ X 4”, simply enter 4 in the Thickness/Depth field, 24 in the Width field, and 24 in the Length field. Click “Calculate”. Your answer should be 7.11 yards.

How many cubic yards in a yard of concrete?

Concrete is sold in cubic yards, so the number of square feet in that yard depends upon how deep the concrete is poured. For instance, if the slab being put in is 4 inches thick, one cubic yard of concrete covers 81 square feet. If it is 8 inches thick, a cubic yard fills 41 square feet.

What is the formula for cubic yards of concrete?

Divide that number by 27 and you will have the cubic yards for the slab. For the footings, take the 42.13 cubic feet calculated earlier and divide by 27 (1 cubic yard of concrete equals 27 cubic feet). The final formula is 48 x 1.33 x .66 = 42.13 divided by 27 = 1.56 cubic yards of concrete.

How many bags of cement to make a cubic yard?

There are 45 80-pound bags and about 60 60-pound bags of concrete in a cubic yard. Each 80-pound bag of concrete covers about 0.6 cubic feet. There are 27 cubic feet in a cubic yard: 27/.6 = 45.

What are the measurements of a yard of concrete?

Concrete is measured by the cubic yard – measuring three feet by three feet by three feet, or 27 cubic feet. One cubic yard of normal concrete will weigh about 4,000 pounds.