What does a backplane do?

A backplane is the circuitry that provides connectivity between the different modules on a switching or routing device. For network monitoring and management, backplane capacity (or backplane bandwidth) is a very important concept. Backplane capacity acts as a cap on the maximum throughput of a network device.

What is the difference between a backplane and a motherboard?

A backplane is generally differentiated from a motherboard by the lack of on-board processing and storage elements. A backplane uses plug-in cards for storage and processing. Backplanes are normally used in preference to cables because of their greater reliability.

What are backplane connectors used for?

Often referred to simply as a backplane, this special type of printed circuit board is used as a support structure for connecting other PCBs. The backplane connector adds mechanical strength and stability while also acting as a plane for integrating other system components called daughterboards.

What is a power backplane?

Power backplanes are designed for all types of plug in type power supply unit which intended for mounting in a 19” card rack which complies to: PICMG 2.11 Power Interface Specification: CPCI, PXI, VME64x & VXS backplanes. VITA 62: OpenVPX backplane.

What is a backplane electronics?

A backplane is an electronic circuit board containing circuitry and sockets into which additional electronic devices on other circuit boards or cards can be plugged; in a computer, generally synonymous with or part of the motherboard.

What is a backplane switch?

As explained, backplane is a circuit biard that connects several connectors in parallel to each other. Switch backplane generally refers to the switch fabric. When we talk about the switch backplane capacity, this refers to the maximum throughput when the switch is fully in use.

What is switch backplane?

The backplane bandwidth of the switch is the maximum amount of data that can be throughput between the switch interface processor or the interface card and bus. The backplane bandwidth marks the total data exchange capability of the switch, and the unit is Gbps, also called the exchange bandwidth.

What is a motherboard backplane?

A backplane is similar to a personal computer’s motherboard and sometimes a term improperly used to describe the computer’s motherboard. The backplane is a printed circuit board containing connections (slots) for expansion boards and allows for communication between all connected boards.

What is a SATA backplane?

SAS / SATA removable hard drive racks facilitate hot-swap operation for RAID setups, or mobility for transferring data or backups. The racks include the frame as well as the drive tray. Spare trays are available on each product page. Trayless drive cages and mobile racks are available as well.

What is a PCIe backplane?

Designed to provide the most PCIe slots on the market while battling the harshest conditions. Each PCIe backplane is built to operate at peak performance on sea, land, air, or space across mission-critical applications and programs worldwide.

What is OIR in Cisco?

Online insertion and removal (OIR) enables you to replace faulty modules without affecting system operation, which is similar to hot-swapping. OIR commands are issued before removing a module and after installing a module. When performing OIR, an identical module must be used to replace the original one.

What is backplane in Cisco?

Do backplane systems use a true motherboard?

Backplane mainboards do not have a motherboard in the true sense of the word; in fact, in a backplane mainboard, the components typically found on a motherboard are located on an expansion adapter card plugged into a slot instead. The boards with the slots are called backplanes, rather than a motherboard.

What is backplane in servers?

What is Backplane? A backplane is similar to a computer’s motherboard which is common in large PC network servers and on other computers on which the processor is upgraded frequently. It is a printer circuit board just like a motherboard but lacks on-board processing and storage elements.

What is the backplane connector?

A backplane (or “backplane system”) is a group of electrical connectors in parallel with each other, so that each pin of each connector is linked to the same relative pin of all the other connectors, forming a computer bus. It is used as a backbone to connect several printed circuit boards together to make up a complete computer system.

What is a backplane controller?

Before we can explain what a backplane controller (BPC) is, we need to define what a backplane is. There are different types of backplanes. We will be discussing drive backplanes. Basically, a backplane is a board (also known as a PCB or printed circuit board) with a bunch of connectors (or slots) that allows a server to access multiple drives.

https://www.youtube.com/watch?v=Q9UMVhR7yv0