What is the SATA cable PC?

Serial Advanced Technology Attachment (SATA) or Serial ATA cables are used to connect devices in computer cable assemblies, such as storage devices, for example. The SATA technology itself is a connecter interface primarily used for computer bus connections in storage applications.

Does my PC need a SATA cable?

If you have one CD ROM drive and one hard disk, then essentially you will need one SATA Data cable and one SATA Power cable. If you have more than two drives in your computer, then you will need to get an additional data and power cable for each drive.

Where can I use SATA cable?

The primary use for the SATA cable is to connect an internal hard drive to a computer motherboard. The general rate of data transfer for the SATA cable has changed a few times since its inception, but has remained high. Version 1 of the SATA cable can transfer 1.5 gigabytes of data per second.

How does SATA cable look like?

SATA Data cables are thin ribbon like cables with small identical 7 pin connectors on each end. The connectors measure no more than 1.5 x 0.4 cm and have distinguishable L-shaped notch for connection. Some SATA Data cables have a 90 degrees angled connectors. SATA Data cables are often provided with the motherboard.

Is SATA a HDD?

SATA is the interface of a hard drive used to read and write data to and from the data storage—either HDD or SSD—and the computer. They are often called 3.5-inch hard drives. A more compact version of the desktop SATA drive is available for laptops.

Where is SATA on motherboard?

Usually the SATA ports are on the lower right side of the motherboard.

Do SSD need SATA cable?

Based on my understanding, HDDs and SSDs need 2 connectors – one for SATA, and one for power. In the picture, the preinstalled HDD (right side) has 2 connectors connected to it, while the free slot only has one connector (left side).

Why did my PC come with a SATA cable?

Basically, a set of either two standards or three standard cables comes with the motherboard itself. SATA cables majorly connect various devices with a computer which can be a storage device, hard disc, and so on. Many new PSUs occur with multiple SATA power connectors. It can be separate or on one cable.

What is the purpose of SATA?

SATA, in full serial advanced technology attachment, also called serial ATA, an interface for transferring data between a computer’s central circuit board and storage devices.

Is SATA a SSD?

There are two main types of SATA-enabled hard drives: hard disk drives (HDD) and solid-state drives (SSD). Overall, SATA HDDs and SSDs are the same in function.

How do I identify a SATA port?

On the left in the device selection panel go to the Motherboard section. The right side of the window will show which SATA ports are available. If 6 Gb / s is written near the port, it means that it is SATA 3 standard. If 3 Gb /s is written near the port, it means that it is SATA 2 standard.